Built–up roofs represent a heavy roof structure that achieves its strength
through consecutive layers. BUR works as an
excellent option because its long lifespan extends through all weather
conditions. Using the steps below, everyone can easily understand the installation
process of built-up roofs.
1. Clean the Roof
“Clean roof, strong roof.”
Initially, workers perform an exhaustive cleaning operation on the roof surface.
Workers start by removing all current roofing materials.
The workers use their tools to eliminate all existing dust, dirt, and waste materials.
The workers check for dry conditions on the roof before beginning work.
A roof needs to stay clean to maintain its strength.
The new roof layers cannot create proper adhesion to surfaces that remain dirty or wet.
2. Add Insulation (Optional)
“Stay cozy, save money.”
Laborers include insulation as part of their installation process before applying
the new roof structure.
Insulation helps in two ways:
Having insulation acts as a heat-retaining solution during the winter months.
“Good base, good roof.”
The building remains at a comfortable temperature both during summer
days and winter nights.
Insulation costs you less money since your heating and cooling systems maintain low
operational requirements.
3. Put Down a Base Sheet
A base sheet gets applied to the roof once it passes through cleaning.
The sheet is rolled out flat.
The workers fasten the sheet to the roof by gluing or nailing it tightly.
The base sheet adds strength to the roof while maintaining a better bond
between layers of building materials.
When properly applied, this layer strengthens the following materials, which
become better attached.
4. Add Layers of Felt and Hot Asphalt
“More layers, more strength.”
Now the real building starts!
A worker starts by extending a strong fabric called roofing felt across the roof surface.
The workers apply hot asphalt as a sticky black substance covering the felt.
When hot asphalt touches the felt, it will create a firm bond to the roof surface.
Technical staff implement this procedure multiple times, yet the correct number of
layers is between 3 and 5.
A new layer builds up roof strength at each application.
A roof benefits substantially from additional layers because they create more effective
protection from rain, wind, and direct sunlight.
5. Put a Top Layer
“Top it off to keep it tough.”
When all the layers are complete, the workers place one final covering at the top.
There are two common choices:
Gravel:
Small stones called gravel are distributed across the roofing material.
Special Coating:
The application of special coatings follows two methods: rolling and
spraying tough paint-like substances on the roof surface.
Roof protection comes from the top layer, which defends against hot sun and heavy rain,
together with strong wind.
Hot sun
Heavy rain
Strong winds
Extra layers on the top surface make roofs cool down while extending their lifespan.
The installation process ends with adding the top layer because it makes
the structural design more durable.
6. Final Check
“Check it right, keep it tight.”
The workers execute a complete examination of the roof after finishing their work.
The inspection team monitors for both weak spots and faults across the roof surface.
Workers restore minor issues discovered in their quality assessment.
Workers complete the process by removing tools as well as other remaining
supplies from the site.
This step is very important!
Your roof receives finishing touches that result in its becoming strong and safe
for defending your home.
Why Choose Built-Up Roofs?
Built-up roofs carry multiple advantages, including their extended lifespan of more than
thirty years together with their strong resistance to rain and snow, as well as
their strong structure.
Built-up roofs have a long lifespan that exceeds 30 years, even when doubled.
Built-up roofs create excellent protection under all weather conditions that include
rain storms alongside snowfall, and high heat exposure.
Built-up roofs maintain their strength under normal conditions to avoid breaking.
Built-up roofs provide an advantage because their maintenance needs are
simple during incidents.
Built-up roofs are favored by numerous property developers because of their
excellent performance.
Conclusion
Caution is needed because the installation process of built-up roofs requires
systematic procedures. The roof-cleaning stage begins operations,
followed by felt layers, then finished by applying a strong top coat. A
built-up roof provides long-lasting peace of mind to property owners when
properly installed. A roof selected by you will provide strength, together
with lasting safety, if you want both attributes.
You can get assistance from The Straight Path Construction today.
